Aztech 500AV HomePlug Adapter with mains passthrough
The Aztech PL-HL115EP HomePlug AV 500Mbps can transform your home power lines into a networking infrastructure. HomePlug is a fast and simple way to connect to the Internet with easy connection between your computers, games consoles, laptops, smart phones anywhere in your home where you have a mains socket.
The mains passthrough socket is a useful addition to this plug. The socket is filtered which makes it ideal for plugging in other power supplies which may cause noise on your mains. Often lots of power supplies in one mains extension causes noisy mains which can interfere with HomePlugs, using the filtered socket on the mains passthrough adapter can help alleviate this problem in your home.
If you are a short of sockets this adapter is useful, plug the mains passthrough device in the wall and plug your mains extension into the mains passthrough socket.
You need at least two HomePlugs to create the connection. Traditionally, one plug is connected to your Internet router, the 2nd plug is placed in the remote area, such as your lounge, study or kitchen. The Plug connected to the router, takes the Internet signal and transfers it along your mains wiring, the 2nd plug takes the signal and distributes it via the Gigabit Ethernet port directly to your device.
Powered by the Qualcomm Atheros High Performance AR7400 chipset this Aztech 500AV adapter is compliant with IEEE1901 and Homeplug AV, allowing hassle free compatibility with existing Homeplug AV devices and other suppliers of HomePlug AV devices. The AR7400 includes a faster processor and high speed interface. With these added high performance abilities, the 500AV adapter is perfect for the ultra-high speed High Definition entertainment network in your home.
Enhanced Quality of Service (QOS) provides the guaranteed bandwidth required for multimedia including TV over IP (IPTV), higher data rate broadband sharing, Online- Gaming, VoIP Calls, extending Wireless coverage, Audio-Video transmission across the network as well as Network camera connectivity.
The Solwise and Aztech 500AV adapters all have a configuration push button for a convenient way of creating a secure HomePlug network without the need to use software. Security support is by 128-bit AES Hardware encryption, ensuring the network is secure.
Remember, you will need at least two HomePlug devices to form a HomePlug connection. More HomePlug AV devices can be added to further share your network.
|Main Chipset||Atheros (Intellon) AR7400|
|Computer Interface||IEEE802.3 (10BASE-T)
|Standards||IEEE 1901 / HomePlug AV|
|Network Interface||One RJ-45 (10/100/1000Base-T Ethernet)
One 500Mbps power line port supporting co-existence with HomePlug 1.0 (14/85Mbps)
|Security||128-bit AES link encryption with key management|
|Data PHY Rate||500Mbps over Powerline and 10/100/1000Mbps over Ethernet|
|Modulation Schemes||OFDM symbol modulation on line synchronization 1024/256/64/16/8 - QAM, QPSK, BPSK, ROBO carrier modulation|
|Frequency Band||2 ~ 50 Mhz|
|Additional Protocols||Mix of TDMA and CSMA/CA channel access scheme;
CO device generates a periodic beacon carrier for channel access scheme
|Operation Range||Estimated range of 300 meters in wall power lines|
|Cabling||Cat. 5 UTP cable|
|Operating Temperature||0°C to 40°C ambient temperature|
|Storage Temperature||-20°C to 70°C ambient temperature|
|Humidity||10 to 90% maximum (non-condensing)|
|Power Input||100 ~ 240V @ 50/60Hz internal|
|Dimensions||See image above
Packing Box: 14 x 18 x 8 cm
|Warranty||2 year warranty|